Steel tube driver with push point

Go to Product List

Steel tube Harpoon driverThis will mount to a wood pole. The stainless steel push pin is 3/8" x 4" turned down at the point to 1/4" or 5/16" to accept the dart. The head is made from steel tube with a 1 1/2" thick steel plug. The head has three holes drilled in it so that it can be screwed to a wooden pole. The head is drilled and tapped to receive the push point. If you need to change the push point you just unscrew the pin and screw in another one. You never have to remove the head from the pole. This head has the weight of the iron pipe but is sleek.

Wood poles can be found in the molding section of Lowes or Home Depot. This head will fit on 1 1/4" or 1 3/8" poles.